A discreet loudspeaker that does not go unnoticed? The 5010 bookshelf speaker is small enough to not disturb the harmony of your space, but its sound is sure to turn heads. With out-of-this-world performance, this speaker will make you vibrate with emotion
The 5010 bookshelf speaker is small enough to not disturb the harmony of your space, but its sound is sure to turn heads. With out-of-this-world performance, this speaker will make you vibrate with emotion wherever you place it.
The revolution in stereo and home cinema speakers.
The new 5000 series from Q Acoustics is a range of stereo and home cinema speakers that will redefine your perceptions of how a speaker can look and sound. Embodying a significant advance in driver design, the C3 Continuous Curved Cone mid/bass driver elevates the 5000 Series beyond any rival.
Incorporating innovative cabinet technology first used in the company’s flagship Concept series, the 5000 Series is as seamless on the inside as it is sophisticated and contemporary on the outside.
The revolutionary nature of the C3 Continuous Curved ConeTM is also reflected in the minimalist design of the 5000 Series, with its sophisticated yet contemporary lines tending towards the elegant form of the latest Concept loudspeaker series. The facades are laminated with a layer of butyl rubber and a black acrylic board, not only to ensure a damping layer to suppress the vibrations that occur, but also to offer an attractive aesthetic.
At the heart of the new mid/bass driver design is the C3 Continuous Curved Cone. The geometry of the cone requires good piston force for optimal performance .
The magnets are coupled to large coils to increase piston force, resulting in a 50% increase in power handling and control over another driver. The result is an improvement in the dynamic range of the speaker, especially in the handling of low frequencies.
Based on the design principle of the latest Concept Series tweeter , the high-frequency driver unit is hermetically sealed and mechanically isolated (floating) to prevent internal pressure variations from inside the cabinet and the mid/range driver. adjacent bass driver .
The internal enclosure is carefully vented for less distortion , with a lower crossover point.
The revolution in mid/bass driver components
A true componentry revolution in mid/bass driver design, the C3 Continuous Curved Cone profile is the result of extensive research and expert engineering to combine the bass performance benefits of a traditional tapered cone with the mid/high frequency control of a funnel cone.
By creating a smooth continuous single curve profile, the benefits are clear. Its excellent dispersion, together with its well-controlled frequency response and low harmonic distortion, allows for smoother integration with the tweeter .
Deep bass dynamics are also superior, and this, together with a more precise and dampened bass sound, allows for greater flexibility in positioning the speakers close to the walls of the listening room.
Bass unit
1 x 110mm (4.5 inch)
High frequency unit
1 x 25mm (1.0 inch)
Frequency Response (-6dB)
56Hz – 30kHz
nominal impedance
6 ohms
Minimum impedance
3.3 ohms
Sensitivity (2.83V @ 1kHz)
86.3dB/w/m
Recommended amplifier power
15-90W
crossover frequency
2.5kHz
Dimensions (per speaker / HxWxD)
264 x 160 x 263 mm (10.4 x 6.3 x 10.4 inches)
Weight (per speaker)
5.6kg (12.3lbs)
Unobtrusive design: The 5010 speakers are small enough to not disturb the harmony of your space, yet their sound is of high quality.
Exceptional Performance: Q Acoustics’ 5000 Series represents a significant advance in driver construction, with the C3 Continuous Curved Cone mid/bass driver elevating the 5000 Series beyond any rival.
Sophisticated and contemporary design: The 5000 series has a minimalist, sophisticated and contemporary design, with the face laminated with a layer of butyl rubber and a black acrylic edge that not only offer a damping layer to eliminate vibrations, but also an aesthetic captivating.
Improved Low-Frequency Handling: The mid/bass driver’s C3 Continuous Curved Cone offers improved low-frequency handling, thanks to magnets coupled to large voice coils that increase piston force and control.
Improved Audio Quality: The high-frequency driver is hermetically sealed and mechanically isolated (floating) to prevent internal pressure variations from inside the cabinet and adjacent mid/bass driver.
High-quality Components: The mid/bass driver’s C3 Continuous Curved Cone profile is the result of extensive research and expert engineering to combine the bass performance benefits of a traditional tapered cone with mid/high frequency control of a funnel cone. The result is better dispersion, well controlled frequency response and reduced harmonic distortion.
Flexibility in placement: With superior deep bass dynamics, the 5010 speakers allow for greater flexibility in placement near the walls of the listening room.
Advanced Technical Specifications: Q Acoustics 5010 loudspeakers have advanced technical specifications, including a nominal impedance of 6 , a frequency response of 56Hz – 30kHz and a recommended amplifier power of 15-90W.
5010
5020
Woofer unit
1 x 110mm
1 x 125mm
Tweeter unit
1 x 25mm
1 x 25mm
Frequency Response (-6dB)
56Hz – 30kHz
53Hz – 30kHz
nominal impedance
6 ohms
6 ohms
Minimum impedance
3.3 ohms
3.3 ohms
Sensitivity (2.83V @ 1kHz)
86.3dB/w/m
87.9dB/w/m
Recommended amplifier power
15-90W
25-100W
crossover frequency
2.5kHz
2.5kHz
Volume
5.0L
6.8L
Dimensions (per speaker)
264x160x263mm
284x180x293mm
Weight (per speaker)
5.6kg
7.0kg
From the table, it can be seen that the 5020 model has a larger woofer unit and effective volume, suggesting that it may be capable of producing more powerful and deeper bass.
It also has a higher recommended amplifier power, which means it may require more power for optimal performance.
However, the 5010 model has a slightly higher sensitivity, meaning it may be slightly more efficient at converting electrical energy into sound.
Reviews
There are no reviews yet.